ErreDue’s Saturn
pure Nitrogen generators produce a continuous flow of oxygen-free
nitrogen, with a very low dew point, through filtration and consequent
purification of a compressed air stream.
NitroBOX
requires only compressed air (already present in your facility or
produced with a compressor) and a power supply, with significant cost
and time savings. Thanks to the PSA technology, Nitrogen is produced
directly from ambient air, no chemicals required.
NitroBOX
is designed and developed to allow a very quick and easy installation,
in order to get on-site Nitrogen supply at desired pressure: a real Plug&Play system.
The extremely high purity of the nitrogen gas produced by Saturn
generators is reached thanks to the addition of a very small percentage
of hydrogen (0.5-1%) produced onboard the generator. The consequent
passage through a catalytic reactor and a molecular sieve guarantee the
removal of oxygen, other gases and water traces.
NitroBOX
is a compact and easy solution to produce pressurized Nitrogen directly
where it's needed, for laser cutting and every other application where
high purity Nitrogen is needed.
Saturn
Nitrogen generators have a totally automatic functioning, controlled by
a PLC with a touchscreen display interface. Like every ErreDue’s
product, Saturn generators can be remotely managed through an Ethernet
connection.
Saturn
generators avoid using gas cylinders and liquid nitrogen containers,
reducing costs, labour and system footprint Production capacity of Saturn can be increased after installation, simply by adding production modules.
Advantages of on-site Nitrogen production:
- On-site production means no downtime to swap cylinders, no cost for
gas transport, no Nitrogen waste due to low residual pressure inside
the cylinders.
- On-site production means constant quality of the gas, no fluctuation due to different batches of gas or gas contamination
- On-site production means higher safety for laser operators, no high pressure tank or liquid Nitrogen is required.
The high purity of Nitrogen produced by NitroBOX allows cutting stainless steel up to 20 mm thickness, with a sharp and shiny cut edge.
MARS Hydrogen generators don't require any maintenance
NitroBOX autonomously produces Nitrogen needed for cutting, storing it inside its integrated 40 bar tank. Nitrogen flows from NitroBOX to the laser system with flow rates up to 500Nm 3/day. Storage capacity can be easily increased by adding one or more tanks next to the NitroBOX system.
|